smr transmissions

904/727/518 transmission BANDS
HOME
NEW '97-04 DAKOTA PARTS
MODULAR TRANSMISSION KIT
904/727/518 transmission BANDS
CONVERTER MODELS
SMR EQUIPPED CARS
CONVERTER FEATURES
VALVEBODIES
REBUILD KITS
ADAPTER KITS
RESTORATION TRANSMISSIONS
STREET PRO TRANSMISSIONS
PRO SPORTSMAN TRANSMISSIONS
CHRYSLER OVERDRIVES
OVERDRIVE TECHNICAL INFO
OVERDRIVE VALVEBODY UPGRADE KIT
MEGA TORQ TRANSMISSION
COMPETITION ELIMINATOR M/T TRANSMISSION
Mega Torq 727 Box KIT
727 "SHORTIE" OVERDRIVE TRANSMISSIONS
727 "Shortie" OVERDRIVE KIT
RAM/DAKOTA 3 SPEED CONVERSION KIT
SPECIALTY PARTS for the TF904
SPECIALTY PARTS for the TF727 TRANSMISSION
NEW PRODUCTS-
INFO ABOUT YOUR CAR?
smrlogoshaddow.jpg

for performance and reliability-
TOP QUALITY BRAKE BANDS
are of utmost importance

SMR TRANSMISSIONS offers a complete line of Superior quality bands for both Low/Reverse (Rear) apply and Intermediate (2nd, Front) apply applications.
 
For all STREET, HIGH PERFORMANCE, HEAVY DUTY and COMPETITION applications.

TORQUEFLITE 727, A518, A618 APPLICATIONS:

727flexbands.jpg
727 Pro series FLEX BANDS

Raybestos Pro Series Flex band features heavy welded anchors and the latest technology, carbon composite lining, to provide unsurpassed reliability for high performance street and truck applications.  This band is standard in our Street Pro and Pro Sportsman transmissions and Rebuild Kits.
 
High Performance Red Series Flex band features the heavy duty band core as the Pro Series, with a high performance, high co-efficiency red lining for use in street/strip applications where less drum wear is desired.  The red lining is required on all Aluminum drum applications 
 
 
 
 

727castbands.jpg
727 Cast Competition Bands

Cast KEVLAR lined Competition Band - The standard in competition band design since 1964, this cast band provides the ultimate in anchoring performance and structural reliability, for 2nd gear apply.  The KEVLAR lining withstands extreme heat and friction under the high demands of bringing the front drum to an immediate stop on the 1-2 shift.  The spring action of the heavy casting has the ability to rebound from the apply position for a cleaner, quicker 2-3 shift.
 
With the same cast core as the Kevlar cast band, the cast RED LINED Competition Band, exhibits superior co-efficiency without the agressive demands on the contact surface of the drum.   This band is a must for competition application utilizing an Aluminum Direct Drum.
CURRENTLY OUT OF STOCK
 
 

superband.jpg
727/518/618 "SUPER BAND"

In a league of its' own!   The "SUPERBAND", is the Ultimate in Competition Bands for the 727, 518, 618 series Torqueflite transmissions.
This new casting, exhibits all of the superior benefits of our cast competition bands above, PLUS it is a full 1/4" wider increasing the surface contact area on the direct drum by 15% for an extreme apply under high horsepower and r.p.m. applications.  Extreme Competition and Heavy Load applications with 5 clutches or more or extra large billet drums, need the added braking capacity of this band.  Recommended when installing any Billet Steel Direct Drum
 
Available with either the Extreme duty Carbon lining or High Co-efficient Red lining (for Aluminum Drums). 

727lowbands.jpg
727/518/618 LOW/REVERSE (rear) BANDS

HEAVY DUTY LOW-REVERSE Bands provide the reliability essential to superior performance in a quality performance, heavy duty or competition transmission.
Although the low reverse band is a non-shifting application, except with a low band apply valvebody or a transmission with 2nd-1st gear downshift characteristics, its' ability to positively hold the rear drum in manual low and reverse loads, is extremely important.
Like the Cast Competition Intermediate Band, the natural spring release action of the low/reverse band, reduces drag and accomodates and quicker, cleaner 2nd gear shift, for performance improvement.
A top quality low/reverse band is critical to the holding power and instant release of a Transbrake application.
Available in KEVLAR or COMPETITION RED lining for steel or aluminum drums respectively.
 
  

904proseriesband.jpg
TF904, A500 Pro Series Flex Band

 TORQUEFLITE A904, A999, A500 APPLICATIONS:
 
 
 
 
 
Raybestos Pro Series Flex band features heavy welded anchors and the latest technology, carbon composite lining, to provide unsurpassed reliability for high performance street and truck applications. This band is standard in our Street Pro and Pro Sportsman transmissions and Rebuild Kits.
High Performance Red Series Flex band features the heavy duty band core as the Pro Series, with a high performance, high co-efficiency red lining for use in street/strip applications where less drum wear is desired. The red lining is required on all Aluminum drum applications

904bands.jpg
904/A500 Cast Competition Bands

 
Cast KEVLAR lined Competition Band - The standard in competition band design since 1964, this cast band provides the ultimate in anchoring performance and structural reliability, for 2nd gear apply. The KEVLAR lining withstands extreme heat and friction under the high demands of bringing the front drum to an immediate stop on the 1-2 shift. The spring action of the heavy casting has the ability to rebound from the apply position for a cleaner, quicker 2-3 shift.
With the same cast core as the Kevlar cast band, the cast RED LINED Competition Band, exhibits superior co-efficiency without the agressive demands on the contact surface of the drum. This band is a must for competition application utilizing an Aluminum Direct Drum.

904lowbands.jpg
904/A500 High Performance and Competition Low Reverse Bands

 
HEAVY DUTY LOW-REVERSE Bands provide the reliability essential to superior performance in a quality performance, heavy duty or competition transmission.
Although the low reverse band is a non-shifting application, except with a low band apply valvebody or a transmission with 2nd-1st gear downshift characteristics, its' ability to positively hold the rear drum in manual low and reverse loads, is extremely important.
Like the Cast Competition Intermediate Band, the natural spring release action of the low/reverse band, reduces drag and accomodates and quicker, cleaner 2nd gear shift, for performance improvement.
A top quality low/reverse band is critical to the holding power and instant release of a Transbrake application.
Available in KEVLAR or COMPETITION RED lining for steel or aluminum drums respectively.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Enter supporting content here