CLIENT TECH SHEET

smr transmissions

CLIENT TECH SHEET

TO HELP US UNDERSTAND WHAT VEHICLE YOU HAVE, YOUR SPECIFIC USES, WHAT YOU EXPECT IN TERMS OF PERFORMANCE AND DRIVABILITY, SO WE CAN BE MOST HELPFUL IN PROVIDING WHAT YOU NEED,

WE ASK THAT YOU TAKE A FEW MINUTES TO FILL OUT THIS ON-LINE TECHNICAL QUESTIONNAIRE AND SUBMIT IT TO US.

NOTE: Be as specific as possible - but if you don't know the answer - leave it blank.

If you are needing a torque converter, it is very important that you provide the camshaft duration @ .050 and centerline as these specifications determines the operating range of your engine.

Your phone number and e-mail address is important to us, because this submission does not provide us with a direct reply link to your site.

YOUR NAME
ADDRESS
CITY
STATE/PROV
ZIP/PC
COUNTRY (If other than U.S.A. or Canada)
PHONE-(work)
PHONE-(Home)
YOUR E-MAIL ADDRESS
FAX#
INTENDED USE OF VEHICLE (eg: Street only, Street/Strip, Drag only, Off road, Puller,etc)
VEHICLE: model&year
ENGINE MAKE and MODEL(OEM original engine size-eg: Dodge 360, Chrysler 440)
ENGINE SIZE (cu-in)-As it will be run.
BORE and STROKE
CRANKSHAFT
HEADS (describe heads & modifications)
INTAKE MANIFOLD (make, model and modifications)
CARB(S) size, make, mods
CAMSHAFT MAKE
CAM TYPE (eg: hyd.)
PART NUMBER
DURATION @ .050" INTAKE
DURATION @.050" EXHAUST
VALVE LIFT-INTAKE
VALVE LIFT-EXHAUST
LOBE SEPARATION (CENTERLINE)
VEHICLE WEIGHT (with driver)
REAR GEAR RATIO
TIRE SIZE (diameter in inches)
TRANSMISSION TYPE(eg: TF727) and YEAR (if known)
SHIFT CONTROL
EXTRA NOTES
CONVERTER SIZE (if known)
DESIRED FLASH STALL (if known)
USING A MOTORPLATE (between engine & trans)?
LOCK-UP CONVERTER?
CRANK PILOT DIAMETER (OTHER THAN STANDARD)
BALANCE WEIGHTS (for externally balanced engines)
BOLT CIRCLE OF FLEXPLATE
SPECIAL NOTES:
TYPE OF FUEL
will you be using NITROUS (if so what h.p. shot)
will you be using a SUPER CHARGER
are you using a TURBO CHARGER system?
ESTIMATED TORQUE & HORSEPOWER
do these figures INCLUDE the Nitrous, Super charger or Turbos
Do You have ENGINE DYNO SHEETS for your engine as it will be run?
Current E.T. and MPH (if using same engine combination)
WHICH SMR PRODUCT(S) ARE OF INTEREST? eg:transmission,converter,other
HOW DID HEAR OF US?

THIS INFORMATION WILL GREATLY ASSIST US IN RECOMMENDING THE CORRECT SMR PRODUCT FOR YOUR SPECIFIC APPLICATION.

We will contact you by e-mail if we need further information and look forward to being in direct contact to discuss how we may help you obtain the best product for your specific needs.

WE ARE ALWAYS PLEASED TO TALK TO YOU LIVE - CALL US TOLL FREE AT 888-846-6603